Acorp 4845PE Manual page 37

Chapter 2
IDE HDD Auto-Detection
Press Enter on this item to let BIOS auto-detect your Hard Disk
and show all the Primary Hard Disk Parameters ( Capacity,
Cylinder, Head, Precomp, Landing Zone, Sector) on the menu.
IDE Primary(Master/Slave) / Secondary(Master/Slave)
This item allows you to detect the Hard Disk in 3 ways.
The Choices: Auto: BIOS Auto-detect HDD;
Access Mode
This item allows you to select the Access mode to the Hard
Disk..
The Choices:
CHS: Select the Cylinder, Head, Sector addressing mode to
access Hard Disk;
LBA: Select the Logical Block Addressing mode to access Hard
Disk.
Large: Select Large Mode to access Hard Disk;
Auto: Allow BIOS to auto-access Hard Disk;
Capacity
Showing the capacity of Hard Disk in MB.
Cylinder
Showing the number of cylinder in the Hard Disk.
Head
Showing the number of heads in the Hard Disk.
Precomp
The number of Pre-compensation.
Landing Zone
Number of Landing zone in the Hard Disk.
Sector
The number of Sector in the Hard Disk.
None: No Hard Disk detected;
Manual: Manually detect HDD
2-37
4845PE BIOS Setup