SMART MAX GEOSYSTEMS DE2A Manual page 16

SMART MAX GEOSYSTEMS CO.,LTD
www.smartmaxgeosystems.com
②Press
0SET
horizontal reading of target
A as 0°00'00"
③Aim at the second target
B. The required V/H angle
to target
displayed.
★ Press ENT,the vertical and horizontal angle can be sent out
through RS232.
How to Collimate (Reference)
1. Point the telescope toward the light. Turn the diopter ring and
adjust the diopter so that the cross hairs are clearly observed.
(Turn the diopter toward you first and then backward to focus).
2. Aim the target at the peak of the triangle mark of the sighting
collimator. Allow a certain space between the sighting collimator
and yourself for collimating.
3. Focus the target with the focusing knob.If parallax is created
between the cross hairs and the target when viewing vertically or
horizontally while looking into the telescope, focusing is
incorrect or diopter adjustment is poor. This adversely affects
to set
B will be
info@smartmaxgeosystems.com
ANG
08-01-02 12：00
V
： 81°54'21"
H
： 0°00'00"
R
ANG
08-01-02 12：00
V
： 81°54'21"
H
： 57°33'58"
R
12