Adam 821x Manual page 229

CPU ADAM 821x
Overview of the
Event-IDs
ADAM 8000 Manual CPU 821x – Rev 1.1
Event-ID Description
0xE000 reserved
0xE001 reserved
0xE002 reserved
0xE003 Error at parameterization/ configuration ADAM-BUS
0xE004 Multi-parameterization of a peripheral address
0xE005 Error at address information parsing
0xE006 Error at DP slave information parsing
0xE007 Configured in-/output bytes do not fit in the peripheral area
(DP-Slave / High-speed counter)
0xE008 Error at High-speed counter information parsing
0xE009 reserved
0xE010 Not defined module detected at backplane bus
0xE0CC Communication error MPI / Serial
0xE100 MMC access error
0xE101 MMC file system error
0xE102 MMC FAT error
0xE200 MMC writing ready (Copy Ram2Rom)
0xE300 Internal Flash writing ready (Copy Ram2Rom)
Chapter 9 Instruction list
8-37