Table of Contents
Advertisement
Chapter 7 Integrated OBs, SFBs and SFCs
SFC 234 - RESET
Description
Parameter
Operating modes
7-40
The RESET_ALL function is called via the order number 0. This resets all
orders of this logical interface, e.g. deletes all order data and interrupts all
active orders.
With a direct function (ANR≠0) only the specified order will be reset on the
logical interface.
The block depends on the VKE and may be called from cyclic, time or
alarm controlled program parts.
The block has two different operating modes:
• RESET ALL
• RESET DIRECT
ADAM 8000 Manual CPU 821x – Rev 1.1
CPU ADAM 821x
11
21
51
x
x
x
Advertisement
Table of Contents
