Table of Contents
Advertisement
CPU ADAM 821x
Send tab
1
2
3
4
5
ADAM 8000 Manual CPU 821x – Rev 1.1
You may use this dialog window to send a message to a specific host.
Input fields
Remote Host
IP address of the station where the data must be saved.
Remote Port
Port address of the remote station.
Local Port
Port address of own (local) station. To simplify matters
you can specify the same port address for remote and
local.
Time (10mSec) Definable interval for cyclic write operations. The mini-
mum timer value for cyclic writes is 5.
Tick-box
UDP
This tick mark selects unsecured communications. No
virtual connections are used by unsecured communication
links. In this manner you may only display UDP
messages.
Buttons
Connect
The connection is established and prepared for the write
operation.
Send this
Data entered into the ASCII field is transferred to the CP
via the connection that was established by means of
Connect.
Chapter 4 Deployment of the CPU 821xNET
[1]
[2]
6
[3]
[4]
[5]
7
[6]
[7]
port data
establish a connection
transfer data via the
connection
list of transmitted
messages
information bar for the
connection status
clear the list of messages
ASCII-text that must be
transferred to the CP
4-39
Advertisement
Table of Contents
