Samsung POWERbot SP2AK9350W series User Manual page 16

Using poWerbot
Location recognizing function
fIf the POWERbot is repositioned when the cleaning is not complete or if the POWERbot operates again after
an Information code appears, it searches the current location and cleans the area where was not cleaned
previously.
- When the location recognizing function operates, the POWERbot searches the current location.
- If the searching is failed more than 3 times, the POWERbot will start to clean from the beginning.
Note
f Start the cleaning again at the area within 39 in (1 m) around where the POWERbot stopped.
– If you start the cleaning at the area more than 39 in (1 m) from where the POWERbot stopped, it is difficult
to search the location and the POWERbot may clean the area where it already cleaned.
Using energy-saving mode
You may select the Energy-saving mode when you go out for a long time or want to save energy.
You can select or cancel the Energy-saving mode only while the POWERbot is docked on the docking station.
How to select or cancel
✻ ✻ When the POWERbot is in the Energy-saving mode, the green lamp of the docking station will blink.
Note
f If you select the Auto/Manual clean mode or press Point cleaning button, the Energy-saving mode
will be cancelled.
f If you set schedule in the Energy-saving mode, the mode will be cancelled.
– If you select the Energy-saving mode after setting the schedule, the schedule will not be cancelled.
f If the power of the docking station is off, the Energy-saving mode will be cancelled.
Press for 5 sec.
ENGLISH-16
Displayed icon
✻ ✻ About 3 seconds later,
the previous indicator will
appear.