Flight Recorder; Attaching And Detaching The Propellers - dji Mavic pro User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. This includes flight
telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft
to the PC through the Micro USB port.

Attaching and Detaching the Propellers

Use only DJI approved propellers with your Mavic Pro. White ring and unmarked propellers indicate
where they should be attached and in which direction whey should spin.
Propellers
Figure
Attach On Motors with white marks
Legends
Attaching the Propellers
Attach the white ringed propellers to the mounting base with white marks. Press the propeller down onto
the mounting plate and rotate in the lock direction until it is secured. Attach the other propellers to the
mounting bases without marks. Unfold all the propellers blades.
Marked
Detaching the Propellers
Press the propellers down into the motor mount and rotate in the unlock direction.
Be aware of the sharp edges of the propellers. Handle with care.
Use only the DJI approved propellers. Do not mix propeller types.
Stand clear of the motors and DO NOT touch the propellers when they are spinning.
Check that the propellers and motors are installed correctly and firmly before every flight.
Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped,
or broken propellers.
To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.
ONLY use original DJI propellers for a better and safer flight experience.
White Ring
Lock : Turn the propellers in the indicated direction to mount and tighten.
Unlock : Turn the propellers in the indicated direction to loosen and remove.
Unmarked
Mavic Pro User Manual
Unmarked
Motors without white marks
©
2016 DJI All Rights Reserved.
25