Operation - Garden Groom Garden Barber Operating Instructions Manual

Hide thumbs Also See for Garden Barber:

Table of Contents

Available languages

Start-up

Mounting the Extra Handle

The product contents include an additional handle (5), which enables more stable handling of the

device.

Attaching the Collecting Hose with the Collecting Bag

❐ During assembly, do not reach into the cutting unit. The blade is

very sharp, you could injure yourself.

Before you start work, you have to attach the collecting hose (2) to the device.

Operation

❐ Keep all parts of your body away from the cutting blade on the

bottom of the device. Do not attempt to hold the material being

cut while the blade is rotating.

❐ Wear safety goggles.

❐ Carry the trimmer by the handle when the blade is idle.

❐ Do not use the device to trim any wet plants or plants with

branches thicker than 6 mm in order to prevent the blade from

jamming.

❐ Attention! The maximum sound power level of this device is

100 dB (A). Wear an appropriate ear protection!

02064_DE-GB-FR-NL_V0.indd 18

•

Pull the rubber plug up and out of the main unit, screw the

handle into the threading.

1. Pull the collecting hose out of the collecting bag (1).

2. Slip the open end of the hose over the ejection opening (9) on

the device and secure the hose in the indentation by afﬁ xing the

hook-and-loop fastener. The fastener should be afﬁ xed as closely

as possible around the ejection opening in order to prevent the

hose from slipping.

3. Ensure that the collecting hose does not twist and that the green

line along the hose runs straight to the collecting bag.

4. Fasten the carrying strap (14) using the clasps on the collect-

ing bag. You can slip the strap over your shoulder or buckle it

around your hips. By pulling the strap through the loops, you can

change its length.

08.07.09 14:55

Table of Contents