Navigating The Menus - Vivitar DVR 910HD User Manual

To change the active camera mode, make sure the camera is powered ON and press the MODE
button on the top left of the LCD Panel.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display

Navigating the Menus

Each camera mode has a set of menus specific to that mode.
1) Press the MENU button to open the menus for the current mode.
2) Push LEFT or RIGHT the joystick button to scroll between the various menus for the current mode.
3) Push UP or DOWN the joystick button to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) If the selection can be remembered by the camera, a selection icon
the selected menu option. Changes made to these options will remain as is until you decide to
change them again at a later time.
6) Some menu options are single-use functions that are not remembered by the camera and do not
display this icon when selected.
7) At any time you can press the MODE button to exit the menus and return to the previous screen.
10
will appear to the right of