Table of Contents
Advertisement
FUNCTHONS
NPuT MODE
Pressthe SOURCE button on the remote control or the (E) button on the product's top panel to select
the mode you want
Opticat Digitat input
DiN
AUX input
AUX
HDMt input
HDMB
BLUETOOTHmode
BT
TV mode
TV
USBmode
USB
The unit turns off automatically in the following
situations.
•
DJNiHDMtiBTiTViUSBiARC Mode
tf there is no audio signat for 25 minutes.
•
AUX Mode
tf the AUX cable is disconnected for 25
minutes.
If there is no KEY input for 8 hours when the
AUX cable is connected. To turn this function
ON or OFF,press and hold the _-II button for
5 seconds. AUTO POWERDOWN ON / OFF
appears on the display.
ARC (HDMI OUT)
o
o
HDMt Cable
The ARC function allows digital audio to output via the HDMt OUT (ARC) po_.
tt can be enabled onty when the SoundStand is connected to a TV that supports the ARC function.
ANYNET+ must be turned on.
• This function is not available if the HDMt cable does not support ARC.
• The ARC function is activated in DJN mode if you have connected the unit to a TV that suppo_s
ARC.
• To turn off the ARC function, turn ANYNET+ off.
14.
Advertisement
Table of Contents
