Advertisement
Canon, Olympus, Panasonic, and Sony Housings
Match your housing
to the correct tray
insert as shown.
The insert cut-out
should match the
bottom of the
housing tripod mount base plate,
diagram A. Remove protective backing to expose adhesive and attach
insert to recess in the center of the tray, diagram B. Attach tray to
housing through Center Hole using 1/4-20 x 1/2" Screw and Split Lock
Washer, diagram C.
Diagram A
SONY A
Panasonic
1/4-20 x 1/2"Screw
Split Lock Washer
CANON A
OLYMPUS
Diagram C
SONY A
Panasonic
Tray Inserts
Diagram B
Front of Tray
Center
Hole
CANON C
Protective
Backing
1/4-20
Threaded
Mounting
Hole
3
Advertisement
