Set Up Your Device; Initial Setup - Samsung CONVOY 4 User Manual

Set Up Your Device

Turn the Phone On or Off
1. Open the phone.
2. Press and hold
power-on screen displays.
Note: Do not turn on the phone when mobile phone use
is prohibited.
3. If the phone requests a password, enter it and
press
information, see "Security"
The Home screen displays while the phone
searches for your network. After the phone finds
your network and displays adequate signal strength
bars, you can make or receive calls.
Note: The display language is preset to Automatic
at the factory. To change the language, use the
Language menu. For more information, see
"Language" on page 131.
4. When you want to switch off the phone, press
and hold End/Power until the power-off image
displays.
Getting Started
End/Power until the phone
Center key. For more
on page 132.

Initial Setup

The first time you turn on your phone, Set-up Wizard
prompts you to configure basic preferences so you
can quickly get started using your phone.
You can also access Set-up Wizard at any time in
Settings.
1. From the Home screen, press
2. Use Preview,
follow the prompts and set preferences:
•
Font style: Choose a font style for the dial,
menus, and messaging.
•
Font size: Choose a font size for the dial, menus,
and messaging.
•
Volume key control: When enabled, you can
adjust the display's font size by pressing the
Volume Key.
13
Menu >
Skip, and Next or Set to
Set Up Your Device