Aqua Lung Soul i3 User Manual page 17

2. For optimum cylinder retention, center the
GripLock buckle assembly on the curve of the
cylinder. Connect the bail into the bail slot of
the lever. Hold the lever and pull the webbing to
tighten the micro adjustment. Secure the hook
and loop webbing on the micro adjustment.
3. Push the lever forward until it stops in the pre-
locked position.
NOTE: The pre-locked position ensures your fingers do not get caught in the lever.
4. Push the lever down into the locked position.
Verify the lever is secured in the locked position.
Once the cylinder band is set up, further adjustment
is typically not needed.
BC
Home
© 2012 Aqua Lung International
English