Aqua Lung Soul i3 User Manual page 13

5. Place the fitting over the quick disconnect plug and
firmly push inward while releasing the hose grip. Check
to ensure the hose is securely attached.
6. To test the connection, slowly open the cylinder valve and pressurize the regulator. Lift up on the
lever and listen for the flow of air into the BC bladder.
NOTE: BC's using the i3 system are equipped with longer then normal MP inflator hoses. It is
very important to us the inflator hose provided with your BC (if the hose is too short it will not
reach the i3 control unit).
Hose lengths are as follows:
XXS/XS/SM - 27 inches (68.5 cm) (pn 44827)- Red
M/ML/L - 33 inches (84 cm) (pn 44833) - White
XL - (Dimension i3 and Axiom i3 only) 36 inches (91.5 cm) (pn 44836) - Blue
XXL - (Axiom i3 only) 40 inches (101.5 cm) (pn 44840) - Lt Gray
BC
Home
© 2012 Aqua Lung International
English