Special Accessories - Stihl MS 290 Instruction Manual

English
Chain sprockets
Spur or rim sprocket
7-tooth for .325"
Cutting attachment (MS 310, MS 390)
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic guide bars
Bar lengths (3/8"): 40, 45, 50 cm
Groove width: 1.3 mm
3/8" chains
Rapid Super Comfort 3 (33 RSC3),
Rapid Micro Comfort (33 RMC), Rapid
Super Comfort (33 RSC)
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.3 mm
Chain sprockets
Spur or rim sprocket
7-tooth for 3/8"
Cutting attachment (MS 290, MS 310,
MS 390)
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA-Standard Z 62.3,
"Chain Leaflet" inside chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
44

Special Accessories

Chain scabbard
If you use guide bars of different lengths
on the saw, the length of the chain
scabbard must be matched to the guide
bar to help reduce the risk of injury.
If the chain scabbard does not cover the
full length of the guide bar, a suitable
chain scabbard or a scabbard extension
is necessary.
Depending on the model, the scabbard
extension either comes standard with
the saw or is available as a special
accessory.
Fitting the chain scabbard extension
1
cm
INCH
1
Push the scabbard extension,
N
locking tabs (1) first, onto the
scabbard until the required length is
obtained.
Other special accessories
File holder with round file
–
Filing gauge
–
Reference gauges
–
STIHL lubricating grease
–
STIHL filler nozzle for fuel – helps
–
avoid spills and overfilling during
refueling
STIHL filler nozzle for chain oil –
–
helps avoid spills and overfilling
Contact your STIHL dealer for more
information on these and other special
accessories.
MS 290, MS 310, MS 390