Daikin FTXM-K Series Service Manual page 32

Main Functions
The following drawing shows a schematic view of the inverter principle:
Inverter Features The inverter provides the following features:
Frequency Limits The following functions regulate the minimum and maximum frequency:
Low
High
Forced Cooling Refer to page 110 for detail.
Operation
17
Amount of heat
exchanged air (large)
Amount of heat
exchanged air (small)
freq=
constant
The regulating capacity can be changed according to the changes in the outdoor
temperature and cooling / heating load.
Quick heating and quick cooling
The rotation speed of the compressor is increased when starting the heating (or cooling).
This enables to reach the set temperature quickly.
Even during extreme cold weather, high capacity is achieved. It is maintained even when the
outdoor temperature is 2°C.
Comfortable air conditioning
A fine adjustment is integrated to keep the room temperature constant.
Energy saving heating and cooling
Once the set temperature is reached, the energy saving operation enables to maintain the
room temperature at low power.
Frequency
Four way valve operation compensation. Refer to page 41.
Compressor protection function. Refer to page 41.
Discharge pipe temperature control. Refer to page 42.
Input current control. Refer to page 43.
Freeze-up protection control. Refer to page 44.
Heating peak-cut control. Refer to page 44.
Defrost control. Refer to page 46.
Refrigerant circulation rate (high)
high speed
high f
low f
low speed
50 Hz
capacity=
freq=variable
60 Hz
variable
Refrigerant circulation rate (low)
Functions
SiBE041434E
Amount of heat
exchanged air (large)
Amount of heat
exchanged air (small)
(R2812)
Function and Control