Aux Section Controls - Panasonic WR-DA7 User Manual

Channel Strip – input gain controls with channel control and status
1
indicators. Also called a Channel Fader Strip.
AUTOMATION/AUX LED button – selects the display mode of the
2
Channel Strip LED field indicators, and arms the AUTOMATION system.
MASTER DISPLAY section – the METER and CHANNEL buttons are
3
direct buttons to the respective LCD screen windows. These should be
considered "home base" for the LCD display.
EQUALIZER section – controls for setting the equalization parameters
4
for a selected channel.
PAN/ASSIGN/
5
the pan and bus assignments for a selected channel.
DYNAMICS/DELAY section – controls for setting the onboard dynamics
6
processing parameters for a selected channel.
AUX section – controls for routing channels to outboard sources and for
7
defining the signal path as either pre-fader or post-fader.
Display Bridge – contains the LCD screen, L/R meter display, and
8
primary mixer display status indicators.
BUS Fader Strip – controls for output BUSes.
9
10
MASTER L/R Fader Strip – controls for L/R MASTER output.
11 Fader Layer Controls section – selects the current fader layer to be
displayed.
12 MONITOR section – volume and selection controls for monitoring.
13 SETUP section – mixer function, or display control buttons.
SCENE MEMORY section – buttons for writing and reading the 50 mixer
14
scene memories.
15 LIBRARY section – buttons for storing and recalling Channel, EQ and
Dynamics libraries.
16
Keypad – alphanumeric keys for entering numbers or text.
17 Cursor Control section – buttons and controls for defining the cursor
actions.
18 Headset Control section – the location of the headset connector and
the level control of the DA7 is immediately below the right front edge of
the Top Panel.
-
2 5
, BUS ASSIGN section – controls for setting
C h a p t e r 2
D A 7 U s e r s ' G u i d e