Operator Title Input
Cursor to the
button, and press the ENTER button to set the edit mode.
(Remote operation is not allowed in the edit mode.) Cursor to the [TITLE] of
the relevant operator, and press the ENTER button. The Name Edit Window
appears. Input the title.
See Section 5-3 Library Windows, for more information on the [Name
Edit Window] for title input operations.
[COMMAND MODE] Area
From this area you can switch the modes between control change and free
definition. Press the
Press the
button to select the user definition mode.
Button
Indicate and set a control change number.
Button
Edit transmission data for the buttons, switches, knobs, and faders in the
user definition mode.
[SW STS] Area
Switch the status of the buttons which are applied to the selected
user definition mode.
When the selection is [SOLO] or [ON], two messages for each
status, on and off, must be edited. When this is done, select
or
in the [SW STS] area.
OFF
Data Row Input Part
Here you can input MIDI exclusive messages to transmit.
This row appears if [FREE DEF] is selected.
-
11
1 8
button to select the control change mode.
C h a p t e r 1 1
ON
D A 7 U s e r s ' G u i d e