Executing A Reset; Forced Shut Down; Carry Out A Battery Reset; Help If Problems Occur - Fujitsu Q616 Operating Manual

Troubleshooting and tips

Executing a reset

If the device no longer responds to your inputs, select one of the following options:

Forced shut down

► Keep the ON/OFF button pressed for at least 4 seconds.
The device will shut down. You can then restart it.

Carry out a battery reset

► Shut down the device.
If the device does not respond, you may have to force the shutdown,
as described in the previous section.
► Disconnect the mains adapter from the device.
► Press the volume up button and the shortcut button at the same time.
The device performs a reset, comparable to removing the battery. You can then restart it.

Help if problems occur

Should you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
► For further clarification of the problem, contact the Service Desk for your country
("http://support.ts.fujitsu.com/contact/servicedesk"). When you do this, please have
ready the ID number and serial number of your system.

The Tablet PC's date or time is incorrect

Dateisincorrect Incorrectdate/time Timenotcorrect Time,daylightsavings Summer time Timenotcorrect
Cause
Time and date are incorrect.
Date and time are still set incorrectly after
switching on the Tablet PC.
62
Troubleshooting
► With the BIOS-Setup-Utility, you can set the
date and time in the main menu.
► Please contact your sales outlet or our
Hotline/Service Desk.
Fujitsu