SWAGTRON Swagger User Manual page 17

speed as normal while the Swagger is in use.
Leave this setting at it's default value. Changing it may cause the scooter to
malfunction.
P 04: Measurement Setting
This setting determines the unit of measurement in which your current speed is displayed. Speed may be
displayed in either miles per hour (MPH or Mp/h) or kilometers per hour (KPH or Kp/h). By default, this setting
is at 0, with the measurement being kilometers per hour (KPH or Kp/h). This setting may be changed as
desired. If changed, the display will show the related icon.
P 05: Powered Acceleration Start Setting
This setting is related to voltage and affects acceleration. Levels may be set to 0 or 1. By default, this setting
is at 0.
Selecting 0 will turn this feature on, meaning voltage build up is not necessary and the throttle may be used
immediately for powered acceleration.
Selecting 1 will turn this feature off, meaning you will need to manually accelerate the scooter (to build up
voltage) before the throttle may be used for powered acceleration. This setting may be changed as desired.
Selecting 1 (powered acceleration off) may improve battery life as manual acceleration
NOTE
helps conserves power.
SWAGTRON SWAGGER COLLAPSIBLE ELECTRIC SCOOTER USER'S MANUAL
®
13