SWAGTRON Swagger User Manual page 16

button to cycle between settings. For each setting, use the UP ARROW and DOWN ARROW buttons to adjust
options or levels according to which setting you are modifying. To exit settings, simply press and hold the UP
ARROW and DOWN ARROW buttons simultaneously or refrain from pressing any button and the display will
time out and return to the main interface on its own. See the following information for details related to each
setting.
P 00: Low Voltage Battery Setting
This setting is related to voltage. Voltage may be changed between 24v, 36v, and 48v. By default, this
setting is at 21.5v. DO NOT change this setting from its default value. Changing it may cause the Swagger to
malfunction.
P 01: Wheel Diameter Setting
This setting is related to wheel size. By default, this setting is at 05, with the number indicating wheel size.
Leave this setting at its default value. Changing it may cause the Swagger to malfunction.
P 02: Factory Setting
By default, this setting is at 009. It is strongly recommended to leave this setting at its default value. Changing
it may cause the Swagger to malfunction.
P 03: Speed Display Setting
By default, this setting is at 001. Levels may be set to 000 or 001. Selecting 000, the numbers on the display
will not show speed even while the Swagger is in use. Selecting 001, the numbers on the display will show
12
SWAGTRON SWAGGER COLLAPSIBLE ELECTRIC SCOOTER USER'S MANUAL
®