Configuration - Tenda WH450A User Manual

3.7.4 Configuration

Backup & Restore
This section allows you to save a copy of the device configurations on your local hard drive or to restore
the previous configurations back to the device.
1. Backup: Once you have configured the device the way you want it, you can save these settings to a
configuration file on your local hard drive that can later be imported to your device in case that the device
is restored to factory default settings. To do so, click the Backup button and specify a directory to save
settings on your local hardware.
2. Restore: Click the Browse button to locate and select a configuration file that is saved previously
on your local hard drive and then click Restore to restore it. Configurations will be restored after device
reboot.
Restore to Factory Default
Click the Restore to Factory Default button to reset Device to factory default settings.
18
Access Point