Allen-Bradley PowerFlex 753 Quick Start Manual page 14

Step 3: Power Up, Configure the Drive, and Spin the Motor Shaft
• Parameter 29 [Mtr NP Pwr Units]
For parameter 29, choose the unit of measurement is based on the actual nameplate.
If the nameplate is in HP (default unit), continue to parameter 30 [Motor NP Power].
If your nameplate value is in kW, change the default power units from HP to kW.
a. Press the EDIT
b. Use the
c. Press the
ENTER
Stopped
0.000 Hz
Port 00 Dev Param
Mtr NP Pwr Units
ESC PAR#
Motor NP Power Units Screen
• Parameter 30 [Motor NP Power]
• Parameter 31 [Motor Poles]
14
soft key.
soft key to scroll to kW.
soft key.
Stopped
AUTO
0.000 Hz
F
29
Edit Mtr NP Pwr Units
HP 0
0 << 1
EDIT ESC
Power Units Selection Screen
Rockwell Automation Publication 750-QS001A-EN-P - March 2015
Stopped
AUTO
0.000 Hz
F
Edit Mtr NP Pwr Units
HP 0
0 << 1
ENTER ESC
Power Units Selection Screen
Stopped
AUTO
0.000 Hz
F
Port 00 Dev Param
Mtr NP Pwr Units
kW 1
ENTER ESC PAR#
Motor NP Power Units Screen
AUTO
F
29
kW 1
EDIT