aguri AGR700 SERIES User Manual page 52

How to add your own POIs (Points of interest) to your
AGR700 series satellite navigation system.
1. First of all you need to make sure that your list of POIs is in a format that is compatible
with your AGR700 series sat nav. Your POIs need to be in a .csv format Excel
spreadsheet with the Longitude in column A, Latitude in column B, and the name of
the POI in column C, as per the example below. As long as the data is entered in to the
correct column as shown in the example below, you can add as many rows of data as
you like.
Please note that you will need software version 1.2.11 or later installed on your
AGR700 to enable you to add your own POIs. Please refer to the user manual for
instructions on how to update the software on your AGR700 if you are not familiar
with the software update procedure.
2. Power on your AGR700 and when the main Menu appears on the display, connect it to
your PC using the micro USB data cable provided with your device. Once connected
to your PC, your AGR700 should display a new screen displaying the message 'USB
connected' as per the screen shot below. Press the button 'Turn on USB storage' and
then 'OK' when the next pop-up window is displayed asking for confi rmation.
52
Press the 'Turn
on USB storage'
button to establish a
connection between
your AGR700 and
your PC.