aguri AGR700 SERIES User Manual page 41

Settings
Video loop time (min)
If you have chosen to record in loops, you can select how long you would like each loop to
be.
Image quality
Choose the level of image quality you would like to record in.
User note. If you select a higher image quality, the video recorded will be clearer.
However, if the image quality is higher, each video fi le recorded will also be bigger
and will take up more room on the SD card. As a result older video footage will be
over-written more quickly once the SD card is full.
User note. If you are involved in an accident, it is always advisable to remove the
SD card immediately to ensure that the video recorded of the event is not lost.
Shock sensor sensitivity
Your device is designed to save any video footage it thinks is related to an event or
accident. It does this by using a built-in shock sensor to sense for any impacts or hard
breaking. You can adjust the sensitivity of the shock sensor to suit your requirements.
Shock sensor
Turn the built-in shock sensor on and off.
Emergency record
If 'Emergency record' is switched on and you are within the DVR App, you can touch the
LCD anywhere to automatically save and lock a section of video recorded to ensure it is
protected.
User note. This is not recommended for normal vehicle use.
LCD brightness
Adjust the LCD brightness level when in DVR mode.
41