Change System Menu Language; Turn On Progressive Scan - Philips FWD410/51 User Manual

2
([Video Setup]).
Select
3
Select [TV System] and then press
( ).
4
Select a setting and then press OK.
• [PAL] - For TV with PAL color system.
• [NTSC] - For TV with NTSC color
system.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
5
To exit the menu, press
Change system menu
language
1
Press SETUP.
2
([General Setup]).
Select
3
Select [OSD Language] and then press
( ).
4
Select a setting and then press OK.
5
To exit the menu, press

Turn on progressive scan

Note
•
To use the progressive scan feature, you need to
connect a progressive scan TV with the component
video sockets (see 'Option 1: Connect to the
component video sockets' on page 10).
1
Turn on the TV to the correct viewing
channel for this unit.
2
SETUP.
Press
3
([Video Setup]).
Select
4
Select [Progressive] -> [On], and then
press OK.
» The progressive setup is complete.
SETUP.
SETUP.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
•
1) Press to open the disc compartment.
•
2) Press .
•
3) Press AUDIO.
5
Press SETUP to exit the menu.
» You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
Note
•
During play, when the progressive scan mode is on for
both this unit and the TV, distorted picture may display.
In this case, turn off the progressive scan feature on
both this unit and the TV.
EN 13