Preference Setup - Philips FWD410/51 User Manual

4:3 Pan Scan (PS)
4:3 Letter Box (LB)
[4:3 Pan Scan] – For 4:3 screen TV: full-
•
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
•
wide-screen display with black bars on the
top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen TV:
•
display ratio 16:9.
[Picture Settings]
Select a predefined set of picture color settings.
[Standard] – Original color setting.
•
• [Bright] – Vibrant color setting.
[Soft] - Warm color setting.
•
[Personal] – Customizes the color setting.
•
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
[On] - Turn on progressive scan.
•
[Off] - Turn off progressive scan mode.
•

Preference setup

On the [Preference Setup] page, you
can set the following options:
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle
language for disc play.
[Disc Menu]
Select the preferred disc menu language.
20 EN
16:9 (Wide Screen)
Note
•
If the language you have set is not available on the disc,
the disc uses its own default language.
•
For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental]
Restricts access to discs that are
unsuitable for children. These types of
discs must be recorded with ratings.
1) Press OK.
2) Select a rating level, then press OK.
3) Press the numeric keys to
enter the password.
Note
•
Rated discs above the level you set in [Parental]
require a password to be played.
•
The ratings are country-dependent. To allow all discs to
play, select '8'.
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC]
Turns on or off the content menu of VCDs/
SVCDs with PBC (playback control) feature.
[On] - display index menu when you load
•
a disc for play.
[Off] - skip the menu and start play from
•
the first title.
[Password]
Set or change the password for locked
discs and play restricted DVDs.
1) Press the numeric keys to enter '0000' or
your last set password at [Old Password] field.
2) Enter the new password at
[New Password] field.
3) Enter the new password again
at [Confirm Password] field.
4) Press OK to exit the menu.