Dubbing From Vhs; One Touch Dubbing (Vhs L Dvd) - Panasonic DIGA DMR-E75V Operating Instructions Manual

[[DVD/VHS]]
Advanced Operations

Dubbing from VHS

DVD/VHS
DIRECT TV REC
∫
CANCEL/RESET
DIRECT NAVIGATOR
VHS REC
REC MODE
EXT LINK
AUDIO

∫ One Touch Dubbing (VHS l DVD)

[RAM] [DVD-R]
With one stroke of the button, programmes are automatically dubbed
onto the disc° from the stopping location on the tape.
° The available disc for dubbing from the tape are DVD-RAM and
non-finalized DVD-R.
Preparation
VHS (Recording source)
≥Press [VHS].
≥Insert the video cassette containing the programme to be copied.
(l 50)
≥Stop the tape at the position where you wish to start recording.
≥Press [AUDIO] to select the audio you wish to record.
DVD (Recording target)
≥Press [DVD].
≥Release protection. (disc l 28, cartridge l 15) [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 17, 49)
≥Select the recording mode.
Settings ("TV System" l 45)
≥When dubbing an NTSC tape to the DVD
- Set "TV System" on "Connection" in "SETUP" to "NTSC".
≥When dubbing a PAL/MESECAM tape to the DVD
- Set "TV System" on "Connection" in "SETUP" to "PAL".
[1]
While both DVD/VHS are stopped,
Press and hold [" DVD, DUBBING] for
3 seconds or more.
≥Check if dubbing starts properly.
≥On the main unit, press [" DVD].
≥The "DUBBING" indicator on the main unit lights.
≥Dubbing is automatically completed when the tape
reaches to the end or the disc becomes full.
≥When dubbing is completed, a message indicating the
end of dubbing appears on the TV screen and then
disappears a few seconds later.
58
VOLUME
CH
AV
VHS
DVD/VHS
VHS DVD
DVD
TRACKING/V-LOCK
CH, W, X
SKIP/INDEX
REW SEARCH FF
G-Code
STOP PAUSE PLAY
CREATE CREATE 1
INPUT SELECT
CHAPTER CHAPTER
;
JET REW
FUNCTIONS
REC MODE DVD REC TIMER
µ
AUDIO DUBBING
DVD
VHS
" DVD
TIME SLIP
OPEN/CLOSE
∫ To stop dubbing halfway through
Press [∫, STOP].
∫ When dubbing is started, the following operations also
start automatically
≥"OSD" on VHS FUNCTIONS ) "OFF" (l 56)
≥Recording channel indication on DVD ) "TP" (l 59)
≥Output to TV ) DVD output
≥The audio mode of the target DVD is fixed to "LR".
∫ Only the following operations are allowed while
dubbing
≥Stopping dubbing by pressing [∫, STOP].
≥Switching the audio mode by pressing [AUDIO]. The audio which
you are hearing is recorded.
∫ Dubbing VHS tape with high picture quality
Select "Automatic" on "S-VHS Dubbing Setting" in "SETUP" on DVD.
(l 44)
≥When performing S-VHS dubbing, "S-VHS" lights on the unit's
display. (l 44)
≥Component signal is used for dubbing.
≥"Automatic" is selected as default. Use the unit as it is.
∫ Dividing a programme to be dubbed
In One Touch Dubbing from VHS to DVD, the programme is
divided into titles by index signal (l 52) detected and then
recorded. You can search desired titles with Direct Navigator's
Title View (l 31) after dubbing to DVD.
≥The recording time may become longer than the original title
depending on the number of index signals.
Note
≥You cannot operate for dubbing while timer recording standby on
both DVD and VHS. Cancel the timer recording standby.
≥When "DVD / VHS Output" is set to "Manual" (l 43), or when VHS
output is selected in starting dubbing, the output is switched to DVD
automatically at the time when dubbing is started.
- When the dubbing is already started, you cannot switch the
output manually.
≥When the dubbing is not started or not executed, the "DUBBING"
indicator blinks for about 7 seconds. Check if the unit is properly
prepared.
≥When a Copy-guarded tape is inserted, the message appears on
the display and the recording stops on the spot.
≥When menu screen appeared on the TV, One Touch Dubbing
cannot start. One Touch Dubbing can perform start, after return
from menu screen.
DVD VHS
DUBBING indicator
/k1.3
VHS DVD
DUBBING
CH REC
DVD