Advanced Operations; Changing The Unit's Settings; Common Procedures; Summary Of Settings - Panasonic DIGA DMR-E75V Operating Instructions Manual

Advanced Operations

DVD/VHS
DIRECT TV REC
CANCEL/RESET
∫
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
SUB MENU
PROG/CHECK
AUDIO
Preparation
≥Press [VHS].

Changing the unit's settings

You can change the settings on VHS only with the following
procedure.
For the settings on DVD, press [DVD], [FUNCTIONS], and then
select "SETUP". (l 42)

∫ Common procedures

[1]
While stopped
Press [FUNCTIONS].
Press [3, 4] to
[2]
select a desired
item.
[3]
Press [ENTER]
or [2, 1] to
change the
setting.
∫ To exit the VHS FUNCTIONS screen
Press [RETURN].
56
VOLUME
CH
AV
VHS
DVD/VHS
VHS DVD
DVD
TRACKING/V-LOCK
G-Code
CREATE CREATE
INPUT SELECT
CHAPTER CHAPTER
SLOW/
SKIP/INDEX REW SEARCH FF
STOP PAUSE PLAY
FUNCTIONS
FUNCTIONS
ENTER
RETURN
RETURN
DISPLAY STATUS TIME SLIP
JET REW
STATUS
VHS REC REC MODE DVD REC TIMER
EXT LINK AUDIO
DUBBING
VHS DVD
VHS FUNCTIONS
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
: select : access
ENTER
: return
RETURN

∫ Summary of settings

This description shows the initial settings for this unit. For
details on menu operation (l left).
≥Underlined items are the factory presets.
∫ VHS FUNCTIONS
Timer recording
(l 54)
QUICK ERASE
(l 57)
You can delete a cassette contents all at once.
Tape length
Set the length of tape you are using so the unit can show the correct
remaining time.
[AUTO (2E-240)] [E-195] [E-260] [E-300]
[AUTO (2E-240)]: The VHS automatically distinguishes E30,
-60, -90, -120, -180 and -240 tapes.
[E-195]: For E195 tape
[E-260]: For E260 tape
[E-300]: For E300 tape
PB Colour system
When the colour of the display does not look natural during playback
of the tape, select either [PAL] or [MESECAM].
[AUTO] [PAL] [MESECAM]
[AUTO]: This unit automatically detects the format in
which the recording was made and selects the
colour system for playback.
[PAL]: To play back a video cassette recorded in the
PAL signal.
[MESECAM]: To play back a video cassette recorded in the
MESECAM signal.
SQPB
To play back tapes recorded in the S-VHS format (SQPB; S-VHS
Quasi Playback).
[AUTO] [ON] [OFF]
[AUTO]: This unit automatically detects the format in
which the recording was made and selects the
same format for playback. However, picture
distortion may appear. Therefore, set to [ON]
or [OFF].
[ON]: Use this setting when playing back a cassette
tape recorded in the S-VHS format.
[OFF]: Use this setting when playing back a cassette
tape recorded in the VHS format only.
OSD
(l 57)
For automatic display on the TV screen of the TV station information,
type of sound system of the programme being watched and the
sound playback mode.
[4:3] [WIDE] [OFF]
[4:3]: Indications can be displayed on the TV
screen.
[WIDE]: Indications can be displayed on the TV screen
when using wide type of TV screen and
selecting the wide screen mode on the TV
setting.
[OFF]: No indications appears.
VHS