Torque Specifications Table - BERG vertex series User Manual

TORQUE SPECIFICATIONS TABLE

The following torque specification table indicates the indicative torque amounts for different bicycle components.
Contact your retailer for any type of repair or component mounting on your bicycle.
TYPE OF BIKE STEM STEM SEAT
HANDLEBAR FORK SEATPOST
BLAST/CHARM 12'' SERIES 14 20
BLAST/CHARM 14''-16" SERIES 14 20
BLAST/CHARM 1 SCREW 18 1 SCREWS 21
20''-24" SERIES 2 SCREWS 12 2 SCREWS 12
TRIBE SERIES 10 10 NOT APPLICABLE
TREKKING SERIES 4 SCREWS 7 2 SCREWS 12
PARK SERIES 13/16 18/22
URBAN SERIES 13/16 18/22
SPOTCROSS SERIES 7 7
KX SPORTY SERIES 7 7
SPORTY SERIES 7 7
TRAILROCK SERIES 6 6
STUKA SERIES 6 6
SIERRA MTB SERIES 6 6
VERTEX SERIES 5 7
TRAIL SERIES 5 7
FUEGO CX SERIES 6 6
FUEGO SERIES 5/6 6/7
EASY FOLDING SERIES 9 12
CLASSIC SERIES / 18
THE TORQUE VALUES ARE PRESENTED IN Nm (NEWTON-METERS)
CERTIFIED WARRANTY REGISTER
Owner
Model of bicycle
Fork
Frame serial number
Purchase Date
Berg Cycles warranty covers the frame of Berg Cycles new bicycles against defects in workmanship and materials for a period of
two years. Berg Cycles warranty also covers all the original parts for a period of two years. Components mounted on bicycles should
be covered by the respective manufacturers' warranties. The paint and decals have a one-year warranty. This warranty is expressly
limited to repair and replacement of defective frames, fork, or defective parts.
Claims for this guarantee must be made through an authorised Berg Cycles dealer, where the proprietary has duly completed the
purchase invoice with the serial number and model of the framework and the data itself.
Alert to the fact that, in the absence of the original invoice duly legible and respectful of the aforementioned points, the warranty
is immediately invalid.
The warranty does not cover normal wear parts (cables, coils, brake shoes, brake pads, pedal plates, chain, shifters, discs, chain,
rims, gears/cassette, tyres, inner tunes).
The warranty does not cover the use or improper maintenance, or installation of bearings or accessories not built in or compatible
with the bicycle.
The warranty does not apply to damage or damage caused by accidents, misuse, abuse, inadequate transportation, neglect, or
when the bicycle frame, or any of the components have not been used according to their more of employment. The modification of
the frame or bicycle components will void the warranty.
Berg Cycles does not take responsibility for damage or accidental damage and consequents.
The costs of manual labour due to the exchange of parts are not covered by the warranty.
20
SEATPOST FRONT WHEEL
FRAME FRAME
22 10/12 14
22 10/12 22/30
22 QUICK RELEASE OR QUICK RELEASE OR
12/14 22/30
8/10 35/40
18 QUICK RELEASE QUICK RELEASE QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE OR 22/30 QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE OR 22/30 QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE OR 22/30 QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE OR 22/30 QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE OR 22/30 QUICK RELEASE OR 22/30
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE
17/24 QUICK RELEASE OR 8/10 QUICK RELEASE
8 QUICK RELEASE OR 8/10 QUICK RELEASE
5/7 CARBON
8 QUICK RELEASE OR 8/10 QUICK RELEASE
15 6/8 QUICK RELEASE
15 6/8 ALUMINIUM QUICK RELEASE
5/7 CARBON
24 QUICK RELEASE 34
24 13 35
Color
Shock
The warranty shall not be applied in cases of inappropriate storage or prolonged outdoor exposure (more than 12h) or to lack of
maintenance cases.
In cases of total replacement of the claimed product, Berg Cycles guarantees replacement for an item of equal or greater range to
the original, with its colour and/or model are subject to availability and will be made in accordance with the existing stock. The
shock absorbers and suspensions have a warranty against manufacturing defects for two years from the date of original purchase.
This warranty is void if there are no records of proper maintenance and servicing carried out by retailers as stated in the mainte-
nance plan. The warranty does not cover wear materials such as spacers, oil seals, o-rings, flanged bushings or oil.
REAR WHEEL
FRAME
Do not forget: All bicycles must have periodic revisions. Good bicycle maintenance preserves its original qualities of use and safety.
8
Before using this bicycle, berg cycles recommends: Perform a thorough check on the bicycle before using it, to ensure it is in perfect
22/30
condition for use.
QUICK RELEASE OR
22/30
35/40
LIFETIME WARRANTY
This warranty is valid from the date of original purchase of the bicycle and applies only to Berg Cycles bicycle(s) acquired from April
2015. Berg Cycles bicycles are developed, tested and produced with the purpose of providing full satisfaction to its users regarding
quality and safety. Berg Cycles respects and works in accordance with the latest European safety norms in a constant search to
improve the quality of its products.
QUICK RELEASE
Thus, Berg Cycles provides its customers with a lifetime warranty against defective materials applicable to the following parts:
QUICK RELEASE
steel, aluminium or carbon frames, rigid steel or aluminium forks, handlebars and steel and aluminium handlebar stems that make
QUICK RELEASE
up Berg Cycles bicycles.
QUICK RELEASE
In order for the lifetime warranty to be valid, the buyer must:
Ask for an invoice of the purchase at the authorized retailer and keep it in a safe place.
QUICK RELEASE
- Register the bicycle at www.bergcycles.com within one month of the purchase date. This warranty will only be valid upon compli-
QUICK RELEASE
ance with the aforementioned mechanisms. The buyer must provide the following information: name, family name, email address,
QUICK RELEASE
date of purchase, and the bicycle's serial number.
- Be the original owner, as this warranty shall not be the transferable for the warranty will expire the moment the bicycle is sold to
34
another individual.
35
The scope of this (voluntary) lifetime warranty must be assessed by our technicians and implies the buyer hands over the bicycle
assembled for verification of the manufacturing defect / or not.
For each component identified with manufacturing defect covered by this warranty, Berg Cycles is obliged to repair the frame, rigid
fork, handlebar, handlebar stem in a short period of time or, in case Berg Cycles deems it fit, to replace a frame, rigid fork, handlebar
or handlebar stem for an equivalent model of the current range, subject to the existing colour, within 30 days upon presentation
of the component at stake at an authorized Berg Cycles dealer. You may consult the list of authorized dealers per country at www.
bergcycles.com
However, this (voluntary) lifetime warranty does not apply if:
The bicycle does not undergo regular maintenance at an authorized dealer or in case of improper maintenance (please refer to the
Berg Cycles maintenance user guide). Also in case of abusive use, misuse outside the scope of the instructions manual for the
corresponding bicycle model, including competition (professional use) and rental or any other commercial activity.
In case the frame, rigid fork and components are painted over. In case of negligence, damage caused by transportation, contact
with aggressive surfaces or accident. Also, in the case of assembly of components that are not compatible with the use of the bicy-
cle and may hinder the behaviour of the Berg Cycles components that are subject to warranty (original frame, rigid fork, handlebar,
handlebar stems) as detailed in the Instructions User Guide of the product.
This warranty applies without prejudice to the European two-year warranty set by the current law in force (in accordance with the
European Standard applicable to consumers' warranties).
In order to be able to obtain service under this warranty, the owner must simply go to a Berg Cycles authorized dealer with the
bicycle, invoice and copy of the online registration at www.bergcycles.com.
This (voluntary) lifetime warranty does not cover any personal injuries that may direct or indirectly result from failure of the bicycle
during its use.
Berg Cycles reserves the right to verify all the conditions necessary to the application of the lifetime warranty and to use all the
appropriate and necessary means to proceed to such verification.
21