Table of Contents
Advertisement
To provide personal safety and keep the
machine in proper working order, follow all
maintenance and safety procedures
presented in this manual. If questions
regarding safety arise. Contact the factory
immediately.
Use factory authorized spare parts to avoid
safety hazards.
Operator safety
Never insert hands or
objects into basket until it
has completely stopped.
Doing so could result in
serious injury
To ensure the safety of machine operators
the following maintenance checks must be
performed daily.
1. Prior to operating the machine, verify
that all warning signs are present and
legible. Missing or illegible signs must be
replaced immediately. Make certain
that spares are available.
2. Check door interlock before starting
operation of the machine, see safety
check list.
3. Do not attempt to operate the machine if
any of the following conditions are
present:
3.1 The door does not remain securely
locked during the entire cycle.
Introduction
Safety Checklist
7
3.2 Excessively high water level is
evident.
3.3 Machine is not connected to a
properly grounded circuit.
Do not bypass any safety devices in the
machine.
Never operate the
machine with a bypassed
or disconnected out-of-
balance switch. Operating
the machine with severe
out-of-balance loads could
result in personal injury
and serious equipment
damage
.
Advertisement
Table of Contents
