Never touch internal or external steam pipes, connections, or
components. These surfaces can be extremely hot and will cause severe
burns. The steam must be turned off and the pipe, connections, and
components allowed to cool before the pipe can be touched
For machines equipped with optional
steam heat, install piping in accordance
with approved commercial steam
practices. Steam requirements are shown
STEAM INLET and CONSUMPTION:
Steam inlet size
Required steam to heat bath 10F (5.55C)LOW
Required steam to heat bath 10F (5.55C)HIGH
Average Steam consumption per cycle
Installation
Steam Connection
in the table below. Failure to install a
steam filter may void the warranty.
UNITS
DN
kg
kg
kg
25
HP-65
in
13
1/2
lbs
1.5
3.2
lbs
1.8
4
lbs
31
66
HP-125
20
3/4
3.8
8.4
5.8
12.76
88
194