Advertisement

ASSEMBLY INSTRUCTIONS
FOR
YOUR TR 401
(PLEASE REFER TO "ASSEMBLY INSTRUCTIONS FOR YOUR 401s STATIONARY CRIB"
OR TO "ASSEMBLY INSTRUCTIONS FOR YOUR 401 DROPSIDE CRIB")
If you don't have your assembly manual anymore, you can download a copy
from the "Assembly manuals" section of our website
or request one at
WARNING:
THE PROPER USE OF THIS CRIB IS
IMPORTANT FOR YOUR BABY'S SAFETY. TO KEEP
Y O U R
B A B Y
S E C U R E
AND TO AVOID POTENTIAL INJURY OR DEATH,
CAREFULLY READ AND FAMILIARIZE YOURSELF
W I T H A L L W A R N I N G S , C A U T I O N S A N D
INSTRUCTIONS IN THE INSTRUCTION BOOKLET.
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE
.
USE
§
ANY MATTRESS USED IN THIS CRIB MUST BE AT
LEAST 27 1/4 IN BY 51 5/8 IN BY 4 IN, WITH A
THICKNESS NOT EXCEEDING 6 IN.
§
THE MINIMUM AGE OF YOUR CHILD SHALL NOT BE
LESS THAN 15 MONTHS AND THE MAXIMUM
WEIGHT SHALL NOT BE GREATER THAN 50LB.
DO NOT THROW THIS INSTRUCTION BOOKLET
IMPORTANT:
PLEASE, READ ALL INSTRUCTIONS
BEFORE ASSEMBLING!
PLEASE, SAVE INSTRUCTIONS FOR
FUTURE USE
20 Corporation Row, Edison, NJ 088 7
Phone
(718) 478 5100, Fax (718) 478 5117
www.rominafurniture.com
TODDLER RAIL
www.rominakidsfurniture.com
contact@rominakidsfurniture.com.
A N D
S A F E ,
1
THIS CRIB CONFORMS TO APPLICABLE
REGULATIONS PROMULGATED BY THE
CONSUMER PRODUCT SAFETY COMMISION
NOTE: THE STYLE OF YOUR CRIB OR OF YOUR
MATTRESS SUPPORT MAY VARY FROM WHAT IS
PICTURED IN THE INSTRUCTION SHEET

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR 401 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Romina TR 401

  • Page 1 THIS CRIB CONFORMS TO APPLICABLE ASSEMBLY INSTRUCTIONS REGULATIONS PROMULGATED BY THE CONSUMER PRODUCT SAFETY COMMISION YOUR TR 401 TODDLER RAIL (PLEASE REFER TO “ASSEMBLY INSTRUCTIONS FOR YOUR 401s STATIONARY CRIB” OR TO “ASSEMBLY INSTRUCTIONS FOR YOUR 401 DROPSIDE CRIB”) If you don’t have your assembly manual anymore, you can download a copy from the “Assembly manuals”...
  • Page 2 FOR DROPSIDE TYPE OF 401 (older version) PLEASE REFER TO “ASSEMBLY INSTRUCTIONS FOR YOUR 401 DROP-SIDE CRIB” STEP 1d (Two adults are required to complete this step) Loosen all the 8 Allen bolts ( & ) which fixes the stabilizing bars ( ) and the fixed side ( ) (see STEP 8 details).
  • Page 3 FOR STATIONARY TYPE OF 401 (newer version) PLEASE REFER TO “ASSEMBLY INSTRUCTIONS FOR YOUR 401s STATIONARY CRIB” STEP 1s (Two adults are required to complete this step) Loosen all the 12 Allen bolts & washers ( ) which fixes the stabilizing bars ( ) and the fixed sides ( ) (see STEP 7 for details).

This manual is also suitable for:

5510

Table of Contents