Touch Pad - Panasonic CF-R1 Series Reference Manual

Touch Pad

Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer
operations.
NOTE
By design the touch pad is to be used with a finger tip only. Therefore, do not use
any other type implement on the touch pad, i.e. stylus, pen, or pencil eraser.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
NOTE
Refer to [Mouse Properties]* for information on basic operations other than the
above.
* Windows 2000 : [Start] - [Settings] - [Control Panel] - [Mouse]
Windows XP : [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on the
second tap leaving your
finger down (applying
pressure) and moving it
on the work surface.
Trace the circumference of the
work surface.
clicking
double-clicking
While holding down the
button, moving your finger
on the work surface
4