Key Combinations - Panasonic CF-R1 Series Reference Manual

Key Combinations

CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
NOTE
Windows XP
When switching to a different user with the Fast User Switching function, these key operations may not work. In this case,
log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.
Key
Functions
LCD brightness con-
Fn + F1
trol ( down)
LCD brightness con-
Fn + F2
trol ( up)
Display change
Fn + F3
Speakers on/off switch
Fn + F4
Volume control
Fn + F5
( down)
Fn + F6
Volume control ( up)
*
Power off using the
Fn + F7
standby function
Remaining capacity of
Fn + F9
the battery pack
*
Power off using the
Fn + F10
hibernation function
* When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, this key combination becomes inoperable.
Pressing this key combination adjusts the brightness
of LCD. The brightness setting is stored in memory
separately under the condition the AC adaptor is
connected and under the condition the AC adaptor
is not connected.
By pressing this key combination, you can select ei-
ther an external display, LCD or simultaneous.
( page 30)
Pressing this key combination turns on/off audio from
the internal speakers and headphone jack. Rebooting
the computer, or powering off then on, restores the
speaker setting of the Setup Utility.
CAUTION
Disabling the speakers will also disable the
warning beep.
If a speaker is connected to the USB port, this
key combination cannot be used.
Pressing this key combination adjusts the volume of
the internal speakers and headphone jack.
NOTE
This key combination cannot be used to ad-
just the volume of the warning beep.
If a speaker is connected to the USB port, this
key combination cannot be used.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. (
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. (
Popup Window
page 7)
page 16)
page 7)
2
OFF
ON
Remaining
capacity (%)
display
Battery pack is
not inserted.