External Monitor - Panasonic CF-R1 Series Reference Manual

Setup Utility
Main Menu
Parameters
(
NumLock*
1
Touch Pad
Speaker
Display* 2
Display Expansion*
3
* 1 Does not operate for Windows.
* The display destination in cases where Windows is not running is set here. If an external display is not connected, all information
2
will appear on the internal LCD even if [External Monitor] or [Simultaneous] is selected.
After Windows starts, the setting made in the following field is enabled.
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Lynx3DM+]
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Lynx3DM+]
* When [Display Expansion] is changed from [Enable] to [Disable], display expansion for the Windows screen is not automatically
3
disabled (turned off). To disable it, set the following setting to [OFF].
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Lynx3DM+] - [Stretch].
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Lynx3DM+] - [Stretch].
Model No:
Serial No:
BIOS Version:
System Time:
System Date:
System Memory:
Hard Disk:
NumLock:
Touch Pad:
Speaker:
Display:
Display Expansion:
: Default)
On
Off
Disable
Enable
Disable
Enable

External Monitor

Internal LCD
Simultaneous
Disable
Enable
xxxx
xxxx
Vx.xxLxx
[xx:xx:xx]
[xx/xx/xxxx]
xxx MB
xx GB
[Off]
[Enable]
[Enable]
[External Monitor]
[Disable]
37