Security Measures - Panasonic CF-R1 Series Reference Manual

Security Measures

To prevent unauthorized access of your computer, the various security measures are provided below.
Situation
You do not want your computer to be used without permission
You do not want the data on the hard disk to be read, or data to
be written to the hard disk, in cases including theft.
NOTE
Windows has a security function that differs from the security function of the Setup Utility. For detailed informa-
tion, refer to the Windows help.
When you do not want your computer to be used without permission
You should set your "Supervisor Password" and "User Password" (The User Password
can only be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
(When [Password on boot] of the [Security] menu is set to [Enable].)
Enter your password* and press Enter .
*
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
If entering the Setup Utility with Supervisor Password
You can register all items of the Setup Utility (
If entering the Setup Utility with User Password
You can not register [Advanced] menu.
The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
F9 does not work.
NOTE
When [Password on boot] in the Setup Utility is set to [Disable], the password is not
necessary when the computer is started up, but the password becomes necessary
when the Setup Utility is started up. This alternative makes it possible to prevent the
contents of the Setup Utility from being changed.
Function to use
Supervisor Password
User Password
SD Memory Card Se-
curity Function
Hard Disk Lock
The correct password
Three incorrect attempts
or
No password for about a minute
page
Reference
below
page 24
page 13
Will Start
Will Not Start
(Power off)
36).
10