Panasonic CF-52 Series Reference Manual page 6

Standby or Hibernation Functions
Do not enter standby or hibernation in the following conditions, otherwise the data or file may be corrupted, standby/hiber-
nation may not work, or malfunction may occur in the computer or the peripheral devices.
• When any of the multimedia pocket device indicator
cator is on.
• When playing/recording audio files or displaying motion video such as MPEG files.
• When playing a DVD-Video.
• When writing to a disk.
• When using communication software or network function.
• When using a PC Card.
(If the card fails to work normally, restart the computer.)
• When an external mouse is connected to the serial port.
If a disc formatted with B's CLiP is inserted into the CD/DVD drive (while
puter cannot enter standby or hibernation. Eject the disc beforehand.
The computer does not enter standby or hibernation immediately after resuming. Wait approximately one minute.
Entering/Resuming from Standby or Hibernation
To enter standby or hibernation
1
Close the display, or press the power switch (A) until a beep
sounds.
Standby: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
You can alternatively use the Windows menu to enter standby or hibernation. To
enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hiberna-
tion, click [start] - [Turn Off Computer], then press and hold Shift and click
[Hibernate].
CAUTION
While the computer is entering standby or hibernation
Do not:
• Touch the keyboard, touch pad, or power switch.
• Use an external mouse or other peripheral device.
• Connect or disconnect the AC adaptor.
• Close or open the display.
Wait until the power indicator blinks green (standby) or goes off (hibernation).
It may take one or two minutes to enter standby or hibernation.
, the hard disk drive indicator
is displayed on the notification area), the com-
6
and the SD Memory Card indi-
*1