Dynamic Methods Of Setting The Printer's Ip Address - Xerox Phaser 6125 User Manual

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
■
■
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1.
2.
3.
4.
5.
Using CentreWare IS
To turn on/off the DHCP protocol:
1.
2.
3.
4.
5.
6.
7.
Downloaded From ManualsPrinter.com Manuals
DHCP (enabled by default on all Phaser printers)
AutoIP
On the control panel, select the Menu button.
Select the menu, and then press the OK button.
Admin
Select the
Network Setup
Select the TCP/IP menu, and then press the OK button.
Select , and then press the OK button.
Get IP Address
Launch your web browser.
Enter the printer's IP address in the browser's Address field.
Select Properties.
Select the Protocols folder on the left navigation panel.
Select TCP/IP.
In the Get IP Address field, select the DHCP/Autonet option.
Click the Save Changes button.
Phaser® 6125 Color Laser Printer
menu, and then press the OK button.
3-6
Configuring the Network Address