Panasonic CF-30 Operating Instructions Manual page 27

Display
The screen does not be-
come bright even if pressing
Fn + F2 .
The LCD brightness chang-
es a number of times when
the AC adaptor is discon-
nected.
Image colors are not repro-
duced as expected when
displaying photographs or
other images.
The screen is disordered.
During Simultaneous display,
one of the screens becomes
disordered.
The external display does
not work normally.
Touch Pad / Touchscreen (only for model with touchscreen)
The cursor does not work.
Cannot input using the touch
pad.
Cannot point the correct
position using the included
stylus.
Reference Manual
The Reference Manual is
not displayed.
The brightness is set low to avoid malfunction where surrounding temperature is high.
Use it in an environment of between 5°C and 35°C.
Intel(R) Display Power Saving Technology is active and automatically changes the LCD
brightness. This is not a malfunction.
Remove the check mark of [Intel(R) Display Power Saving Technology].
A Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver
for Mobile].
B Click [Display Settings] - [Power Settings].
Changing the number of display colors and resolution may affect the screen. Restart the
computer.
Connecting/disconnecting an external display may affect the screen. Restart the com-
puter.
When using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
If you continue to experience problems, try changing the display by clicking [start] -
[Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] - [Dis-
play Devices].
When the [Command Prompt] is set to "Full Screen" by pressing
picture is displayed on one of the screens only. When the window display is restored by
Alt + Enter , the picture is displayed on both screens.
pressing
Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
If the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
U , and R to select [Restart].)
(Press ,
If the computer does not respond to keyboard commands, read "No response" (
28).
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operating
instructions.
Perform the touchscreen calibration (
Install Adobe Reader.
A Log on to Windows as an administrator.
B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK].
Follow the on-screen instructions.
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for updates now].
Alt + Enter , the
page 15).
page
27