Huawei Quidway S9300 Configuration Manual page 80

5 UDP Helper Configuration
l
l
Procedure
Step 1 Enable the UDP helper function.
<Quidway> system-view
[Quidway] udp-helper enable
Step 2 Configure the destination server to which packets of UDP ports are forwarded.
[Quidway] vlan 100
[Quidway-Vlan100] quit
[Quidway] interface vlanif 100
[Quidway-Vlanif100] ip address 10.110.1.1 16
[Quidway-Vlanif100] udp-helper server 10.2.1.1
[Quidway-Vlanif100] quit
[Quidway] quit
Step 3 Verify the configuration.
The destination server to which packets of UDP ports are forwarded on VLANIF 100 is the
NetBIOS-NS name server.
<Quidway> display udp-helper server interface Vlanif 100
vlan-interface
Vlanif100
----End
Configuration Files
Configuration file of the S9300
#
sysname Quidway
#
vlan batch 100
#
udp-helper enable
#
interface Vlanif100
ip address 10.110.1.1 255.255.0.0
udp-helper server 10.2.1.1
#
return
5-8
VLANIF interface of the destination server to which packets of UDP ports are forwarded
IP address of the destination server
Server-Ip
10.2.1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
packet-num
0
Issue 02 (2009-08-06)