Getting Ready To Install - Samsung RF263BEAE SERIES User Manual

Setting up your French Door
Refrigerator

GETTING READY TO INSTALL

THE REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
Selecting the best location for the
refrigerator
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with a leveled fl oor.
• A location with enough space for the
refrigerator doors to open easily.
• A location that allows suffi cient space to the
right, left, back and top for air circulation.
• A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
50 mm
908 mm
DA68-02615A(0.0).indb 09
50 mm
50 mm
• Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the refrigerator where the
temperature will go below (10 ºC).
• Do not locate the refrigerator where it may
become wet.
• Do not install the refrigerator in a damp place or
place where it may come in contact with water.
- Deteriorated insulation of electrical parts may
cause an electric shock or fi re.
• When you use this function the energy
consumption of the refrigerator will increase.
- Remember to turn it off when you don´t
need it and return the freezer to your original
temperature setting power freezing
- If you need to freeze large amount of food
24 hours before.
• To get more space , you can remove top
and mechanical characteristics. A declared
storage volume of frozen food storage
compartment is calculated with these drawers
removed.
• Never stare directly at the UV LED lamp for
long periods of time.
- This may result in eye strain due to the
ultraviolet rays.
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above
CAUTION
the fl oor). Refer to 'Adjusting the Level' in
the manual (on page 12).
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 150 kg.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
setting up _09
2012.7.11 8:41:4 PM