Completing The Set Up - Samsung RF263BEAE SERIES User Manual

Hide thumbs Also See for RF263BEAE SERIES:
Table of Contents

Advertisement

Available languages

Available languages

Plastic tubing
(Supplied)
Ferrule
(Not supplied)
Copper tubing
(Not supplied)
1.
Slip the compression nut through the supplied
plastic tubing
.
2.
Tighten the compression nut
6.35 mm compression fi tting.
-
If you are using copper tubing, slip the
compression nut
(not included) on copper tubing (not included)
as shown.
-
If you are using plastic tubing
molded end (Bulb) of the plastic tubing
the compression fi tting.
Do not use without the molded end(Bulb) of
the plastic tubing
3.
Tighten the compression nut
compression fi tting. Do not over-tighten the
compression nut
4.
Turn water on and check for any leakage.
Only connect the water line to a drinkable
water source. If you have to repair or
CAUTION
disassemble the water line, cut off 6.35 mm
of the plastic tubing to make sure you get
a snug, leak-free connection.
14_ setting up
DA68-02615A(0.0).indb 14
DA68-02615A(0.0).indb 14
Refrigerator
Refrigerator
Compression nut
(6.35 mm) (Supplied)
Compression fi tting
(Supplied)
Bulb
Compression nut
(6.35 mm)
(Not supplied)
Plastic tubing
or
(Not supplied)
Household water line
onto the
(not included) and ferrule
, insert the
into
.
onto the
.

COMPLETING THE SET UP

Now that you have your new refrigerator installed
in place, you are ready to set up and enjoy the
features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
1.
Make sure your refrigerator is in an appropriate
location with reasonable clearance between it
and the wall. Refer to installation instructions in
this manual.
2.
Once the refrigerator is plugged in, make sure
the interior light comes on when you open the
doors.
3.
Set the Temperature control to the coldest
temperature and wait for an hour. The freezer
will get slightly chilled and the motor will run
smoothly. Reset the refrigerator and freezer to
the temperatures you want.
4.
After you plug the refrigerator in, it will
take a few hours to reach the appropriate
temperature. You can store food and drinks
in the refrigerator after the temperature is
suffi ciently cool.
2012.7.11 8:41:20 PM
2012.7.11 8:41:20 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents