Using The Control Panel - Samsung RF263BEAE SERIES User Manual

Hide thumbs Also See for RF263BEAE SERIES:
Table of Contents

Advertisement

Available languages

Available languages

Operating your French Door
Refrigerator

USING THE CONTROL PANEL

8
1
2
3
( 1 ) Energy
Touching this button turns Energy Saver
Saver
mode on and off. When you turn Energy
Hold 3 sec for
Saver on, the Energy Saver icon lights.
°C↔°F
Turn Energy Saver off and the icon
goes off. The Energy Saver function
automatically turns on when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
mode off.
Touch and hold this button for 3
seconds to switch the temperature units
between °C and °F.
( 2 ) Freezer
Touch this button to set the freezer to
(Hold 3 sec
your desired temperature.
for Power
You can set the temperature between
Freeze)
-8 °F and 5 °F (between -23 °C and
-15 °C). Touch and hold this button for
3 seconds to decrease the time needed
to freeze products in the Freezer. It can
be helpful if you need to quickly freeze
easily spoiled items or if the temperature
in the freezer has warmed dramatically
(For example, if the door was left open).
( 3 ) Ice
Touch this button to select the ice or
Type/Water
water function. You can select water or
Hold 3 sec for
the types of ice(cubed/crushed ice).
Filter Reset
Each time you press the button, the
cubed and crushed
ice modes alternate and the Cubed or
Crushed ice icon lights up, indicating
your selection.
After you replace the water fi lter, touch
and hold this button for 3 seconds to
reset the water fi lter life indicator.
DA68-02615A(0.0).indb 15
DA68-02615A(0.0).indb 15
( 4 ) Alarm
Hold 3 sec for
Lighting
4
5
6
7
( 5 ) Fridge
Hold 3 sec for
Power Cool
( 6 ) Ice Off
Hold 3 sec for
Child Lock
( 7 ) Ice Off
(RF263T**)
(RF263B/N**)
To turn the door open alarm on and off
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes.
The beeping stops when you close the
door. The door alarm function is preset
to On in the factory. You can turn it
off by touching and then releasing this
button. You can turn it back on in the
same fashion. The icon lights up when
the function is on.
If you touch and hold the Alarm/Lighting
button for 3 seconds, the dispenser LED
Lamp will stay on.
Touch this button to set the fridge to
your desired temperature. You can set
the temperature between 34 °F and
44 °F (between 7 °C and 1 °C). Touch
and hold this button for 3 seconds
to decrease the time needed to cool
products in the Refrigerator. It can be
helpful if you need to quickly cool easily
spoiled items or if the temperature in
the fridge has warmed dramatically (For
example, if the door was left open).
If you don't want to make more ice,
touch the Ice Off button.
Touching this button for 3 seconds turns
on Child Lock which locks the display
panel and dispenser buttons so the
buttons can not be used. The Child Lock
icon lights up to indicate you've activated
the Child Lock function. Press 3 seconds
to unlock.
If you don't want to make more ice,
touch the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit, press the Ice Off (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice Off
Indicator (
) illuminates.
operating _15
2012.7.11 8:41:20 PM
2012.7.11 8:41:20 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents