Centre stand
Always use the centre stand (1) to safely park the
motorcycle. Its structure ensures proper support of
the motorcycle even under full load.
Warning
Before lowering the centre stand, make sure
that the bearing surface is hard and flat.
Hold the LH handgrip with your left hand and the
handle (2) with the other hand. Push with your right
foot onto central stand bearing surface (3), until it
touches the ground; meanwhile, use handle to pull
motorcycle up and back.
To bring central stand at rest, just push motorcycle
forward, holding it at the handlebar, until the rear
wheel touches the ground. Stand will automatically
go back in place.
318
1
3
Fig. 220
2
1
Fig. 221