Using The Memory Function - Omron M6 Instruction Manual

HEM-7001-ARU.book Page 21 Thursday, January 8, 2009 9:55 AM
3.4

Using the Memory Function

This monitor has a memory capable of storing 90 sets of read-
ings. Every time you complete the measurement, the monitor
automatically stores blood pressure and pulse rate. The moni-
tor also calculates an average reading based on the measure-
ments from the last three readings.
Note: To ensure that the measurement results are recorded
correctly, make sure that the date and time are set cor-
rectly before taking a measurement.
When 90 sets of readings are stored in memory, the old-
est set will be deleted to store a new set.
The date and time of stored readings will be alternately
displayed.
To View the Average Value
Press the
The average values, based on the last three measurements, is
displayed.
memory button.
3.Using the Monitor
EN
21