Panasonic SC-HT743 Operating Instructions Manual page 4

1
Assembling the front speakers
STEP
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ There is no difference between the right and left speakers and stands.
≥ For optional wall mount, refer to page 6.
[HT740] [HT743]
2 Front speakers
(with cover plate)
1
Attach the stand to the base.
1 Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the cable through the base.
Cable
2 Attach the stand to the base while gently pulling on the
end of the speaker cable.
2
Secure the stand to the base.
Screw
Tighten securely.
Stand
Base
Screws
4
Tighten securely.
2 Stands
(with cable)
Base
Stand
Base
Cable
Pull gently.
Slide the speaker
cable into the groove.
The supplied stands are specially designed for
attachment to Panasonic SB-FS740 or SB-FS940
front speakers. Use only as indicated in this setup.
2 Bases 8 Screws
3
Attach the speaker to the stand.
1 Pull out the end of
the speaker cable
and position it
between the ridges.
2 Attach the speaker to the stand.
Speaker
Stand
4
Secure the speaker to the stand.
Speaker
Stand
5
Connect the speaker cable.
Press the speaker cable
into the groove.
Ridges
Cable
Stand
Cover plate
Remove before attaching
the speaker and keep for
wall-mount use (➜ page 6).
Screw
Tighten securely.
Ensure the speaker cable is
centered in the groove.
Insert the wire fully.
_
: White
`
: Blue
Push!