Panasonic SC-HT743 Operating Instructions Manual page 24

Changing the player settings
QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" tab
TV Aspect
Choose the setting to suit your
television and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio
is out of sync with the video.
Still Mode
Specify the type of picture shown
when paused.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
§
Refer to "Frame still and field still" (➜ page 13, Glossary).
∫ "Audio" tab
Dynamic Range Compression
Speaker Settings (➜ page 25)
Set the delay time for your center and
surround speakers.
∫ "HDMI" tab
RGB Range
Set "HDMI Color Space" to "RGB"
(➜ page 22, Picture Menu).
Video Output
(This setting is irrelevant when
connected through the VIDEO OUT or
S-VIDEO OUT terminal.)
Audio Output
[HT940]
Control with HDMI
(HDAVI Control)
∫ "Display" tab
Menu Language
On-Screen Messages
∫ "Others" tab
FL Dimmer
Change the brightness of the unit's
display and Jog LED.
QUICK SETUP
Re-initialize Setting
Return all values in the Setup menus
to the default settings.
24
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ Projection TV
≥ 0ms ≥ 20ms
≥ Automatic
≥ Field §
: The picture is not blurred, but picture quality is lower.
≥ Frame §
: Overall quality is high, but the picture may appear blurred.
≥ Lighter: When connected through VIDEO OUT or S-VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT (Y/P
≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ Center:
0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R): 0.0/5.0/10.0/15.0 ms
≥ Standard
≥ Enhanced: When the black and white images are not distinct.
≥ On: When connected through the HDMI AV OUT terminal. Video is output from the HDMI terminal.
Video is also output from the COMPONENT VIDEO OUT terminal, but only in 480p (progressive).
≥ Off: When connected through the COMPONENT VIDEO OUT terminal. Video is not output from the
HDMI AV OUT terminal, but from the COMPONENT VIDEO OUT terminal according to the setting
of the "Video Output Mode" (➜ page 21, Picture Menu).
≥ On: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the
connected equipment, audio output may differ from the audio settings of the main unit.)
≥ Off: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of
the main unit.)
≥ On: The HDAVI Control function is available (➜ page 30).
≥ Off
≥ English ≥ Français
≥ On ≥ Off
≥ Bright ≥ Dim (Jog LED turns off.)
≥ Auto: The display is dimmed, but brightens when you perform some operations.
(Jog LED turns on when you perform some operations.)
≥ Yes ≥ No
≥ Yes: The password screen is shown if "Ratings" (➜ page 23) is set. Please enter the same password.
After "INIT" on the display disappears, turn the unit off and on again.
≥ No
≥ CRT Projector
≥ Plasma TV
≥ 40ms ≥ 60ms
≥ Español
≥ LCD TV/Projector
≥ 80ms ≥ 100ms
/P ).
B R