Making A Recording; The Reset Function - Panasonic SC-HT16 Operating Instructions Manual

Other functions
TOP MENU
SUB MENU/
PLAY LIST
TV VOL
DVD REC
REC
INPUT MODE
EFFECT
TONE/
BALANCE
OFF
Center Width Control "C-WDTH"
You can adjust the effect of MUSIC and PANORAMA with the
center width control.
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
The default level is 3.
Remote control
1. Press [EFFECT] to select "C-WDTH".
2. Press [–/L] or [+/R] to adjust the effect.
Dimension Control "DIMEN"
You can adjust the effect of MUSIC and PANORAMA with the
dimension control.
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between –3 and +3 — Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
The default is level 0.
Remote control
1. Press [EFFECT] to select "DIMEN".
2. Press [–/L] or [+/R] to adjust the effect.
Adjusting SFC effects
You can adjust the sound field by adjusting the level of the
speakers and the delay time of the surround speakers. These
adjustments can be made for each SFC mode.
To adjust the speaker level
Remote control
1. Press [-LEVEL/–TEST] to select the speaker
channel.
Each time you press the button:
C RS LS SW
→ → →
2. Press [–/L] or [+/R] to adjust the level.
C, RS, and LS:–10 dB to +10 dB
SW:– – – (off) ↔ MIN ↔ 1 – 19 ↔ MAX
To adjust the delay time
Remote control
1. Press [EFFECT].
2. Press [–/L] or [+/R] to change the delay time.
The default is 50 mSEC. (10 mSEC – 100 mSEC)
ENTER
RETURN
TV VOL
TV
REC MODE TV/VIDEO MUTING
-LEVEL/
- TEST
- H.BASS/
-LEVEL/
SUBWOOFER - C.FOCUS
- TEST
EFFECT /L /R
SFC
MUSIC AV/MOVIE
%PL
/L /R

Making a recording

INPUT SELECTOR
POWER
INPUT SELECTOR TUNE MENU
2 2
Recording on other equipment
You can record to a unit connected to DVR/VCR OUT.
You can record any analog source except DVR/VCR IN.
1. Press [INPUT SELECTOR] to select the source to be
recorded.
2. Begin recording.
Follow your recording unit's operating instructions.
3. Start the source to be recorded.
Note
• (SC-HT17) When you select DVD ANALOG 6CH mode, only
sound from the front left and right channels is recorded.
• This unit cannot record digital sources. Connect through the
analog terminals and select "ANALOG" input.

The RESET function

TUNE MENU
2
2
POWER
INPUT SELECTOR TUNE 2 MENU
2
The operation settings for the unit will be initialized to the
settings made at the time of shipment.
However, any preset radio stations will not be erased.
1. Press [MENU] to select "RESET".
2. Press [TUNE 2 or 1] to select "YES".
To cancel, select "NO".
3. Press [MENU].
%DIGITAL %PL
H. BASS
%DIGITAL %PL
H. BASS
21