How To Configure Tcp/Ip; Windows 8.1/Windows 8 - Buffalo AirStation WHR-300HP2 User Manual

How to Configure TCP/IP

Windows 8.1/Windows 8

To configure TCP/IP in Windows 8.1 or Windows 8, follow the procedure below.
1
Open Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Change Adapter Settings on the left side menu.
5
Right-click the network adapter, then click Properties.
6
If the "User Account Control" screen opens, click Yes or Continue.
7
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
8
To have DHCP set your IP address settings automatically, check Obtain an IP address automatically and Obtain DNS
server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: blank
9
Click OK.
59